5 Mistakes to Avoid When Mounting Your TV.

Secure your investment and protect your neck.

There's nothing quite like the sleek, clean look of a professionally mounted television. It instantly elevates a room's aesthetic and provides a fantastic viewing experience. But achieving this perfect look is less about brute force and more about precision, preparation, and knowing what to avoid.

Many DIY enthusiasts, eager to get their new screen on the wall, overlook critical steps. The result? A sore neck from looking up, a messy tangle of cables, or, worst of all, a potentially dangerous and expensive disaster involving a TV crashing down. Poorly executed TV mounting can lead to severe property damage or even injury.

We’re here to stop that from happening. To help you ensure your setup is secure, comfortable, and visually stunning, we've identified the five most common TV mounting mistakes people make and provided expert solutions to guarantee a successful installation. Let's explore how to avoid these mistakes.

❌ Mistake #1: Mounting the TV Too High

This is arguably the most common and easily preventable of all TV mounting mistakes, yet it's made all the time. People often treat their TV like a piece of art, hanging it high up on the wall, which is fine for a painting, but terrible for a screen you stare at for hours.

The Consequence

A TV mounted too high forces your neck muscles to strain backward to maintain a comfortable viewing angle. This leads to the infamous "TV height mistake," causing "TV Neck" and viewer fatigue. It completely undermines the whole point of a relaxed viewing experience.

✅ How to Do It Right: Finding the Optimal Eye-Level

The optimal height for your TV is determined by your seating position.

• The Golden Rule: The center of the screen should be at eye-level when you are sitting and looking straight ahead.
• The Calculation: For most people sitting on a standard couch, this puts the center of the screen about 42 to 48 inches (107cm to 122cm) from the floor.
• For Large TVs (65" and up): If the TV is very large, aim to have the bottom third of the screen at eye level instead of the center, to better encompass your field of vision without strain.
• Pro Tip: Have someone sit down while you hold the TV bracket against the wall. Mark the point on the wall that aligns with their direct sightline—that’s your target center point.

🧱Mistake #2: Ignoring Wall Studs or Wall Type

This is the most critical safety issue on our list of TV mounting mistakes. Many people wrongly assume a few drywall anchors are sufficient for mounting TV to drywall—they are not.

The Consequence

Drywall (gypsum board) alone cannot reliably support the weight and leverage of a modern flat-screen TV and its mount. If you hang a heavy TV directly into only drywall using simple anchors, the anchors will inevitably fail. The TV will rip out of the wall, causing significant damage to the wall, the TV, and potentially anyone nearby.

✅ How to Do It Right: Locating Studs and Using Proper Anchors

The security of your mount depends on anchoring directly into a wall stud (the vertical wooden or metal framing members behind the drywall). This involves proper finding wall studs techniques.

• Use a Stud Finder: Invest in a reliable electronic stud finder. Mark the edges of the stud, and aim to drill pilot holes for the lag bolts directly through the center.
• Verify the Stud: Before drilling, tap the wall—a stud sounds solid, while hollow drywall sounds, well, hollow. A thin nail can also be used to probe the center of the stud before drilling the final, larger holes.
• For Masonry/Concrete Walls: If you have a brick, block, or concrete wall, you must use a hammer drill and specialized masonry anchors (e.g., sleeve anchors or lag shields). Standard wood screws will not work.
• When Studs Don’t Align: If your mounting holes don't perfectly align with the studs, use a wide mounting plate that spans across two studs, or use heavy-duty toggle bolts as a last resort.

💡 Recommended Tools to Find Your Studs

• Don't guess with a simple tapping method—invest in a reliable tool. When buying, look for a model that clearly indicates the stud's edges and center to ensure your lag bolts land perfectly.
• Best Value Electronic Sensor: The Franklin Sensors ProSensor M90 (or similar multi-sensor models) are consistently rated highly for their accuracy and simple, no-calibration design. They use a wide array of LEDs to show you the entire width of the stud instantly.
• Best Budget/Magnetic Option: The C.H. Hanson Magnetic Stud Finder is a battery-free classic. It uses a strong rare-earth magnet to physically stick to the metal screws and nails already in the studs, providing a simple, reliable way to pinpoint the vertical line of your framing.

🔩Mistake #3: Buying the Wrong Mount Type

The sheer variety of TV mounts can be overwhelming. Simply buying the cheapest one or one labeled "for your size TV" often leads to frustration and a sub-par setup.

The Consequence

You might buy a fixed mount when you needed a tilt mount to reduce glare. Worse, you might buy a mount that doesn't physically attach to your TV, resulting in a frustrating return trip to the store and a delayed installation. This is a common choosing the wrong TV mount issue.

✅ How to Do It Right: Matching Your Needs and VESA Standards

You need to match the mount type to your room and viewing needs, and ensure physical compatibility:

• Fixed Mount: Keeps the TV flush against the wall. Great for a clean look where the TV is already at the perfect height and angle.
• Tilt Mount: Allows the TV to tilt vertically up or down. Essential if you have to mount the TV higher (e.g., above a fireplace) or need to reduce glare from overhead lighting.
• Full-Motion (Articulating) Mount: Allows the TV to extend, pivot, and tilt. Perfect for open-plan living spaces, corner mounting, or adjusting the screen for multiple viewing areas.
• Check VESA: VESA is the standard measurement (in millimeters) of the four mounting holes on the back of your TV (e.g., 400x400mm). Before buying, verify the mount supports that exact measurement.

🕸️Mistake #4: Skipping Cable Management

You've successfully secured your TV to the wall, but now you have a dangling nest of HDMI, power, and audio cables hanging beneath it. Messy cables are one of the most visible TV mounting mistakes.

The Consequence

A mess of dangling cables completely ruins the sleek aesthetic of a wall-mounted TV. It can also pose a safety risk, as children or pets could potentially tug on them, damaging the connections or pulling something off a stand. This is often the worst of the cable management mistakes.

✅ How to Do It Right: Conceal and Organize

Cable management doesn't have to be complicated, but it is non-negotiable for a professional finish:

• In-Wall Routing (The Cleanest Look): If you are comfortable working with drywall, the cleanest solution is running the cables behind the wall. Use low-voltage wall plates to safely route the cables down to an outlet or media cabinet.
• Cable Concealer Channels: A non-invasive alternative is using raceways or cable concealer channels. These plastic tracks stick to the wall and can be painted to match your wall color.
• Bundle and Secure: Use Velcro straps or zip ties to bundle and organize the cables coming from the back of the TV before routing them down. This prevents tangling and makes them easier to manage.

✋Mistake #5: Failing to Test the Mount's Security

After all the measuring, drilling, and bolting, it’s tempting to immediately hang the TV and walk away, confident in your work. This is a crucial oversight.

The Consequence

If any of your stud calculations or anchor installations were off, the mount will fail. The moment you hang the expensive TV and let go, you might hear a sickening crack as the mount pulls away from the wall—and you may not be able to catch the screen in time.

✅ How to Do It Right: The Final Security Check

The final, often-skipped step should be a thorough, pre-installation security test:

• The 'Pull-Out' Test: Once the mounting plate is secured to the wall, grip the mount with both hands. Apply a strong, steady pulling force away from the wall to replicate the stress the TV will put on the hardware.
• Check for Movement: There should be absolutely zero wobble, cracking, or movement. If you hear a creak or see the mount shift, stop immediately. Disassemble, identify the weak point, and re-install.
• Check the Tilt/Pivot (If Applicable): Ensure the locking mechanisms are tight and the arms or pivots operate smoothly under a slight load.
• Secure the TV: Once the TV is on the wall, many mounts have a final locking mechanism (a safety screw, quick-release cord, or clip). Do not forget to engage this lock. This prevents the TV from being accidentally lifted off the wall plate.

🛠️ Stop Making TV Mounting Mistakes Today!

Mounting your TV is a highly rewarding DIY project, but it demands respect for the process. By avoiding these five common TV mounting mistakes, you ensure your installation is safe, secure, and provides the best possible viewing experience.

Take the time to find the studs, double-check your height, choose the right mount, manage those cables, and perform that crucial security test.